SIFAA Installation Guide
Installing your SIFAA shower filter is quick and easy — no tools required! Follow these simple steps to start enjoying pure, filtered water in under 2 minutes.
📦 What's In The Box
- 1x SIFAA Filtered Shower Head (Black or White)
- 1x Built-in Filter Cartridge (pre-installed)
🔧 Step-by-Step Installation
- Remove your existing shower head — unscrew it by hand or with a wrench from the wall pipe.
- Screw the SIFAA filter onto the wall pipe by hand — turn clockwise until firmly in place.
- Turn on the water — run for 30 seconds to flush the filter before first use.
- You're done! Enjoy clean, filtered water from your very first shower. 🚿
⚠️ Important Notes
- Compatible with all standard G1/2 shower connections
- Do not overtighten — hand-tight plus a quarter turn is sufficient
- If you notice any leaking, wrap Teflon tape around the wall pipe threads
🔄 Filter Replacement
Replace the SIFAA cartridge every 3 months or 10,000 litres for optimal filtration performance.
- Unscrew the filter body (bottom section)
- Remove the old cartridge and dispose
- Insert the new SIFAA cartridge
- Screw the filter body back on securely
- Run water for 30 seconds before use
📱 Need Help?
Contact us on WhatsApp for a free video call installation walkthrough. We're happy to guide you through the process in real time!